Tcu tune
When in drive does it bog? I have been reading and I guess the EC tcu tune bogs when driving normal.
I don't have a tcu tune, I been reading and some pple with the EC tcu tune have noticed that it bogs when driving normal.
I know this had been a dead thread for awhile but I just bought TCU tune from EC and changed to 3.27 gears. Redlining is really a pain with the "bog" you all speak of. It's more as if it's a real manual.
If you take it close to red line where car wants to shift and let of a couple center meters off pedal and smash the gas again it will shift alot smoother and keep moving. I dont care for it too much but am going to track after adding killer chiller kit, 3.27 gears, and this TCU tune and I'll let you know how my times are effected driving it this way.
Would have been nice if we knew the peak shift points to do this microscopic lift at before smashing into next gear. I will let you all known how it turns out.
If you take it close to red line where car wants to shift and let of a couple center meters off pedal and smash the gas again it will shift alot smoother and keep moving. I dont care for it too much but am going to track after adding killer chiller kit, 3.27 gears, and this TCU tune and I'll let you know how my times are effected driving it this way.
Would have been nice if we knew the peak shift points to do this microscopic lift at before smashing into next gear. I will let you all known how it turns out.
I have had about 10 tcu"s tuned by Rudy, for a 307,,for a 327 and for a 346 and none of them bog. i guess it is where you get your tcu
in fact out of the many people that got their tcu tune from rudy none of them have had a problem ,much less a bog problem.
in fact out of the many people that got their tcu tune from rudy none of them have had a problem ,much less a bog problem.
Thread
Thread Starter
Forum
Replies
Last Post
dpeel82
Crossfire SRT6
7
Mar 24, 2016 12:03 PM
SeanOldaker
Troubleshooting & Technical Questions & Modifications
5
Mar 14, 2016 08:31 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



