SRT 6 - Transmission stuck in gear P0715

Reply Subscribe

Thread Tools

#1 (permalink)

07-27-2018, 10:15 AM

DZL

Thread Starter

Join Date: Nov 2008

Posts: 24

Likes: 0

Received 0 Likes on 0 Posts

SRT 6 - Transmission stuck in gear P0715

Hi,

I have a problem with my transmission, it is stuck in a gear and gives the P0715 code. I changed the transmission fluid (it was leaking a bit so I thought that might also be the issue) and the conductor plate and I went to the local shop to delete the code. I was surprised that it did not change anything, the car is still stuck in a gear and there the still the P0715 code. Could anyone help me and point me in a different direction?

Thanks

Reply Like

#2 (permalink)

07-27-2018, 12:30 PM

RKC00

Join Date: Sep 2016

Location: NE Ga

Age: 65

Posts: 57

Likes: 0

Received 0 Likes on 0 Posts

Re: SRT 6 - Transmission stuck in gear P0715

There is a round electronic connector that goes into the trans on the front, passenger side. Remove, clean both the connector and where it plugs in, replace the connector housing and “O” ring and reinstall. See if this helps solve the issue.

Reply Like

#3 (permalink)

07-27-2018, 02:11 PM

DZL

Thread Starter

Join Date: Nov 2008

Posts: 24

Likes: 0

Received 0 Likes on 0 Posts

Re: SRT 6 - Transmission stuck in gear P0715

Quote:

Originally Posted by RKC00

I changed the plug together with the conductor plate so this cannot be it.

Reply Like

#4 (permalink)

07-27-2018, 03:52 PM

onehundred80

Senior Member

Join Date: Apr 2006

Location: Ontario

Age: 84

Posts: 25,369

Likes: 62

Received 540 Likes on 456 Posts

Re: SRT 6 - Transmission stuck in gear P0715

Quote:

Originally Posted by DZL

I changed the plug together with the conductor plate so this cannot be it.

Back in January 2015 Jessejamesrt6 had a similar problem and he replaced the same parts, he still had the code and the limp mode, it was determined that whoever was clearing the code was not doing a good job of it. A visit to another shop with a better computer to clear the code resulted in no code and no limp mode.
For what it’s worth that is what I found.

Reply Like