I'm working on researching/collecting info for a 6 spd conversion and believe I have everything EXCEPT for 1 item! I have seen it once or twice in exploded diagrams but no p/n and once online but the add was for a whole transmission.

The part in question is a black bracket that the 2 feet of the shifter appear to connect to for shifter mounting here is a link for a visual: https://www.ebay.com/itm/2004-2008-C...ry!23002!US!-1

next question how does it mount to the car?

does it direct mount to the body or connect to 2 other brackets direct mounted to the body? lastly, does it top mount, inside or bottom mount underneath?

If I could get an identity and/or a p/n I would be most thankful.

 

I think you stumped the forum.

 

yea i am going to try the dealer later....i have a few other odds and ends to get.as well. worst case scenario we will just have to fabricate one.

 

 

no it is not #8. to me #8 looks like the mounting of the shifter to the shifter frame.

I left a link which should go to an ebay auction containing it.

it's the frontal mounting point for the shifter assembly. "feet" mounting flanges, whatever they are called.....on your diagram they are the things that #12 attach to but not pictured is the black bracket.

if you click the link it is the only black bracket in the picture.

 

The black item in this photo then.
Could this be it? All sorts of brackets in the diagram attached to this item.
https://www.mopardealerparts.com/p/C...5099434AA.html

 

yes exactly!

best diagram I could find was from an obscure german site but still no identity or pn

 

any idea what the nomenclature for that thing is or a part number?

 

hmmm....think i might have found it but hard to say without pic

5134954AA

 

only other possibility I can come up with is this which #8 looks similar:

.......not letting me upload


https://www.chryslerpartsoverstock.c.../i2119464.html

 

wish me luck and hope they have it,,,,,last 3 didn't...........any chance there is a MB pn for this....perhaps they have it?

 

UPDATE: no luck no one has it.

if anyone on here is parting out a manual car then please hit me up!

I have some time left but really don't want to pay to have this made.

thanks in advance!

 

final update......seems the clk55 has one, yes!

thanks for all the help guys!