Okay Now in Limp Mode Need Guidance
First I have a 2007 coupe with an automatic transmission
.
Alright I have read all of the post here and now know I am in limp mode with my car stuck in first gear and the engine light on. From all of the posts I read I also now know to first address this I should start with getting a conductor plate. It appears that many members have purchased their plates off of ebay. When I went on ebay I was overwhelmed. So, simply, can someone help me a good one to purchase on ebay, as I do not know what I am looking at.
Also, do the speed sensors come connected to the conductor plate or do I have to purchase those separately
Any help would be greatly appreciated
Thanks
.
Alright I have read all of the post here and now know I am in limp mode with my car stuck in first gear and the engine light on. From all of the posts I read I also now know to first address this I should start with getting a conductor plate. It appears that many members have purchased their plates off of ebay. When I went on ebay I was overwhelmed. So, simply, can someone help me a good one to purchase on ebay, as I do not know what I am looking at.
Also, do the speed sensors come connected to the conductor plate or do I have to purchase those separately
Any help would be greatly appreciated
Thanks
The speed sensor is part of the conductor plate.
You can get one from FCPEuro ( 2003 MB SLK320 ), free shipping and lifetime warranty.
Since you are opening the tranny, you will also need a filter and approved fluid, I used Pentosin ATF 134.
There are numerous videos on YouTube on replacing the conductor plate.
Complete kit :
https://www.fcpeuro.com/products/mer...IaAkffEALw_wcB
You can get one from FCPEuro ( 2003 MB SLK320 ), free shipping and lifetime warranty.
Since you are opening the tranny, you will also need a filter and approved fluid, I used Pentosin ATF 134.
There are numerous videos on YouTube on replacing the conductor plate.
Complete kit :
https://www.fcpeuro.com/products/mer...IaAkffEALw_wcB
Here are a couple links for the parts you need from a known, trusted vendor.
NeedsWings Performance Products. 7226 Transmission Conductor Plate
NeedsWings Performance Products. 7226 Transmission Service kit
Great price from FCP
NeedsWings Performance Products. 7226 Transmission Conductor Plate
NeedsWings Performance Products. 7226 Transmission Service kit
Great price from FCP
Last edited by cowancom3; Oct 21, 2019 at 10:09 PM.
first ,,,did ir reset when you turn off your motor? if no then disconnect the pos term on the batt (for about 3 min)
limp mode is the car saving it's self so reset it it happens more than 3 times in a day then you can look into fixing it. jim
limp mode is the car saving it's self so reset it it happens more than 3 times in a day then you can look into fixing it. jim
Thanks so much Jim for the instruction and I m going to go and try the disconnect first.
There are conductor plates on ebay for the $60 to $70 range. How do those conductors differ from the more expensive pates cited in this thread by Needswing and FCP. I know the latter two RE KITS. BUT THE plates in those kits are $155 price range outside of the other pieces. My question are the ebay plates the same as the plates cited in this thread
There are conductor plates on ebay for the $60 to $70 range. How do those conductors differ from the more expensive pates cited in this thread by Needswing and FCP. I know the latter two RE KITS. BUT THE plates in those kits are $155 price range outside of the other pieces. My question are the ebay plates the same as the plates cited in this thread
I don't know,, but as tempermental as these cars are i would get one fron needswings or from a mercedes dealer, then you know you have the right one.
Your issue could be one or more of several things, I have seen issues with throttle bodies, fluid, gas pedals and conductor plates with your symptoms. If you have the car scanned by a Mercedes laptop they can prevent you from replacing parts unnecessarily. Are you confident in your fluid type and level?
As for the conductor plates, I will only sell the oem latest revisions. There are many old or aftermarket ones on ebay for much less but there is no way I want to do the job twice in place of using the right part the first time. I've seen the sting happen too many times. As for the other link above, that is below our cost and we get good discounts as I have been dealing with these cars for 20 years now. I can't touch that price for the latest revision, and i'm not interested in selling the old ones from an OE supplier that has old stock they are trying to flush. Sorry i'm not the cheapest, I try to be so when I can and am happy to revisit pricing on anything that doesn't seem right. If it helps I can discount the conductor plate for you by 10%, i will change it now and keep that active for a week for you if you determine that is what you need.
As for the conductor plates, I will only sell the oem latest revisions. There are many old or aftermarket ones on ebay for much less but there is no way I want to do the job twice in place of using the right part the first time. I've seen the sting happen too many times. As for the other link above, that is below our cost and we get good discounts as I have been dealing with these cars for 20 years now. I can't touch that price for the latest revision, and i'm not interested in selling the old ones from an OE supplier that has old stock they are trying to flush. Sorry i'm not the cheapest, I try to be so when I can and am happy to revisit pricing on anything that doesn't seem right. If it helps I can discount the conductor plate for you by 10%, i will change it now and keep that active for a week for you if you determine that is what you need.
see i told you,,, ..oh the dealer price is over 300... the last time i checked ,,installed my V8 in 2010 and have only needed a few parts sence them if you do need the part get it from needswings you will be a happy camper jim
Thread
Thread Starter
Forum
Replies
Last Post
entropy
Troubleshooting & Technical Questions & Modifications
3
May 23, 2025 11:22 AM
Freezer
Engine, Exhaust, Transmission and Differential
25
Jun 29, 2015 09:11 PM
300zx
Troubleshooting & Technical Questions & Modifications
3
Jul 20, 2008 12:05 PM
bobo54545
Troubleshooting & Technical Questions & Modifications
7
Nov 17, 2007 04:52 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



