Will these work without resistor?...

Reply Subscribe

Thread Tools

Jan 25, 2012 | 10:18 AM

#1 (permalink)

user 8202

Thread Starter

Banned

Joined: Jan 2009

Posts: 711

Likes: 4

From: Ontario

Will these work without resistor?...

....2 x 12V Super White 168/194/2825/T10 LED Rear License Plate Light Bulbs | eBay

I'm assuming these will trigger the "failed bulb lamp"...?

Jan 25, 2012 | 10:20 AM

#2 (permalink)

maxcichon

Senior Member

Joined: Sep 2007

Posts: 8,015

Likes: 14

From: MOFN, AL, 70 miles from George

Re: Will these work without resistor?...

They will not fit. You need a "Festoon" type bulb, 37 mm (?) I think.

http://www.ebay.com/itm/Super-Red-1-...item1e658f05b6

Of course, these are red, look for white ones.

http://autolumination.com/festoon.htm

Last edited by maxcichon; Jan 25, 2012 at 10:23 AM.

Jan 25, 2012 | 10:26 AM

#3 (permalink)

turbomar

Senior Member

Joined: Jul 2011

Posts: 914

Likes: 3

From: Barrhaven, Ontario

Re: Will these work without resistor?...

Maxichon is correct and yes, it will trigger the "light out" lamp

Here:http://www.ebay.com/itm/2pcs-Super-B...item27c1fb5f79

Last edited by turbomar; Jan 25, 2012 at 10:31 AM.

Jan 25, 2012 | 10:40 AM

#4 (permalink)

maxcichon

Senior Member

Joined: Sep 2007

Posts: 8,015

Likes: 14

From: MOFN, AL, 70 miles from George

Re: Will these work without resistor?...

The ones I linked to have an option for the "Non "CANBUS" error type. About 1/4 of the way down the page.

Jan 25, 2012 | 10:43 AM

#5 (permalink)

maxcichon

Senior Member

Joined: Sep 2007

Posts: 8,015

Likes: 14

From: MOFN, AL, 70 miles from George

Re: Will these work without resistor?...

eBay - New & used electronics, cars, apparel, collectibles, sporting goods & more at low prices

Jan 25, 2012 | 01:39 PM

#6 (permalink)

user 8202

Thread Starter

Banned

Joined: Jan 2009

Posts: 711

Likes: 4

From: Ontario

Re: Will these work without resistor?...

Thanks guys for the info....even though they were advertised under "Chrysler Crossfire", the seller makes available a compatibility link....the link says they are not compatible for Crossfires....I'm curious about the last link provided for the SLK320 advertsing "no error". Built in resistor maybe?