Any
Re: Any
Why look for someone who has less knowledge than what is available on this forum, which has more answers to tricky Crossfire problems than any so-called Crossfire trained ‘expert’.
But it is your car so ........
Re: Any
I would also support you locating a reputable independent auto service shop that specializes in German cars. Make sure you locate one that specifically states they have M-B experience. They would be able to work on any aspect of the Crossfire regarding powertrain & rolling chassis. With regards to the Crossfire's Chrysler-designed stuff, your best source for DIY repairs is this Forum. And, as onehundred80 stated, this Forum might be your best source for any & all repairs of the Crossfire. We sort of have "been there; done that" experience. Even if you were planning on taking your car to a reputable repair shop, you could at least research your problem on this Forum, and most likely, find someone who has completed that repair as a DIY process. That way when you go to the shop, you'll have a good understanding of what your problem is and what it takes to get it repaired. Even a good & reputable German-make shop can take advantage of you if they see the opportunity.
Last edited by dedwards0323; 06-28-2020 at 12:01 PM.
Re: Any
sorry none in Ar. but if you find one post to this https://www.crossfireforum.org/forum...air-shops.html so i can put them on our list..
also on this list you have Matt in miami that goes everwhere ,,,last week he was in New York and New Jersey for a roadster top .
also on this list you have Matt in miami that goes everwhere ,,,last week he was in New York and New Jersey for a roadster top .
Join Date: Jun 2009
Location: Fort Worth, Texas
Age: 64
Posts: 13,471
Received 890 Likes
on
694 Posts
Re: Any
I'm in Bella Vista, just moved here in November. All you (we) can do is find a local shop with MB experience.
We've been trying to put together a tech day, but the scare over the virus has paralyzed so many of us...
You are welcome to join us next month for our meet in Eureka Springs. I personally hope for a mini-tech-day during the week.
Details here:
https://www.crossfireforum.org/forum...17-2020-a.html
We've been trying to put together a tech day, but the scare over the virus has paralyzed so many of us...
You are welcome to join us next month for our meet in Eureka Springs. I personally hope for a mini-tech-day during the week.
Details here:
https://www.crossfireforum.org/forum...17-2020-a.html
Thread
Thread Starter
Forum
Replies
Last Post
cassidyrj1
Troubleshooting & Technical Questions & Modifications
0
09-01-2009 07:59 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)