new parts no change

Thread Tools
 
Search this Thread
 
Old Aug 18, 2011 | 03:02 AM
  #1 (permalink)  
speedone's Avatar
Thread Starter
Joined: Aug 2011
Posts: 6
Likes: 0
Thumbs down new parts no change

I had a problem with crossfire a few weeks ago and had the stealership run the codes for me. They said it was the fuel pump....so I put it in myself along with a new filter and cps. Also fixed the rcm..... so it cranks over but engine will not start....I'm thinkng its the battery under the hood...not in the key...red light on the fob lights up just fine..and keyless is fine also....I'm just stumped with this one!!
 
Reply
Old Aug 18, 2011 | 09:52 AM
  #2 (permalink)  
pizzaguy's Avatar
Administrator
Joined: Jun 2009
Posts: 13,953
Likes: 1,280
From: Fort Worth, Texas
Default Re: new parts no change

Do you actually hear the fuel pump run when you turn the key to "on" (but not to "start")?

Did they give you a readout of just what the code(s) were?
 
Reply
Old Aug 20, 2011 | 03:06 AM
  #3 (permalink)  
speedone's Avatar
Thread Starter
Joined: Aug 2011
Posts: 6
Likes: 0
Default Re: new parts no change

Yes the fuel pump turns on.....checked the fuek rail and fuel came out..and no they sure didn't give me the code....I hooked my scanner and it isn't showing any codes...did show that fuel circuit 1&2 are open...
 
Reply
Old Dec 14, 2011 | 04:38 PM
  #4 (permalink)  
mickey5469's Avatar
Joined: Jun 2007
Posts: 125
Likes: 3
From: Gainesville, Ga
Default Re: new parts no change

Try adding a couple gallons of gas my wife's 05 Ltd conv with 70,000k plus just stopped the other day would crank but would not start towed to local dealer( a good one by the way) and said it was the fuel pump installed one and still no go gas guage was showing quarter tank but empty turns out it was a faulty fuel gague sensor driving it now with no problem just watching milage as guage when to refill been six weeks though waiting on knew fuel sensor guage
 
Reply
Old Dec 14, 2011 | 05:04 PM
  #5 (permalink)  
oledoc2u's Avatar
Senior Member
Joined: Mar 2008
Posts: 14,599
Likes: 34
From: IN
Default Re: new parts no change

I would take another look at the rcm unless you used a magnifying glass to insure you actually fixed it. Tricky soldering those joints...makes sure you have a connection on the circuit board.....
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Crossfireconv08
Engine, Exhaust, Transmission and Differential
5
Jul 30, 2015 12:11 PM
UNDER PSI
Crossfire SRT6
3
Jul 18, 2015 02:12 PM
Tp'sfury
Crossfire SRT6
9
Jul 17, 2015 01:15 PM
XFIRED-TX
Crossfire Roadster
4
Jul 14, 2015 10:48 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -4. The time now is 12:00 PM.