Thanks Jerry (LET)! 12.175 114.24!
Good 60's too! Congrats!
Senior Member
Joined: Jul 2006
Posts: 1,535
Likes: 0
From: Southern NJ
Re: Thanks Jerry (LET)! 12.175 114.24!
Originally Posted by Thumper SRT6
It means 1.97 sec to the 60' mark.
I found an online calculator that will estimate a 0-60MPH based on 1/8 mile results:
http://s2nd.com/convert-eighth-mile-...ty-calculator/
I found an online calculator that will estimate a 0-60MPH based on 1/8 mile results:
http://s2nd.com/convert-eighth-mile-...ty-calculator/
Senior Member
Joined: Jan 2007
Posts: 2,743
Likes: 180
From: Michigan
Re: Thanks Jerry (LET)! 12.175 114.24!
congrats on the great runs!
i think that calcualtor is too optimistic, when i toss in our bone stock best run we get
4.25 sec
if that were really the case im sure chrysler would have advertised that.
i think that calcualtor is too optimistic, when i toss in our bone stock best run we get
4.25 sec
if that were really the case im sure chrysler would have advertised that.
Senior Member
Joined: Jul 2006
Posts: 1,535
Likes: 0
From: Southern NJ
Re: Thanks Jerry (LET)! 12.175 114.24!
Originally Posted by NeedsWings
congrats on the great runs!
i think that calcualtor is too optimistic, when i toss in our bone stock best run we get
4.25 sec
if that were really the case im sure chrysler would have advertised that.
i think that calcualtor is too optimistic, when i toss in our bone stock best run we get
4.25 sec
if that were really the case im sure chrysler would have advertised that.
Senior Member
Joined: Jan 2007
Posts: 2,743
Likes: 180
From: Michigan
Re: Thanks Jerry (LET)! 12.175 114.24!
yes, we may be barely breaking into the 3.8's, here is our comparison of having a gtec in the car while at the track earlier this summer...
"first pass was a 12.12@115 versus a 12.20@117 (stage 3 slicked srt-4)
cool, were off to a great start. i used an old school gtec aswell and it showed a 0-60 in 3.92sec and 1/4 in 12.15sec on that pass
second pass i cut a 1.752 60ft and ran 12.10@115
gtec showed 0-60 in 3.91 and 1/4 of a 12.13"
"first pass was a 12.12@115 versus a 12.20@117 (stage 3 slicked srt-4)
cool, were off to a great start. i used an old school gtec aswell and it showed a 0-60 in 3.92sec and 1/4 in 12.15sec on that pass
second pass i cut a 1.752 60ft and ran 12.10@115
gtec showed 0-60 in 3.91 and 1/4 of a 12.13"
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)