made a run the other day.
made a nice run and my IAT's started at 70 and peaked at 118 in the 1/4
11 25 at 125 :: withKCnoscpulley11-7-12.mp4 video by amx1397 - Photobucket
11 25 at 125 :: withKCnoscpulley11-7-12.mp4 video by amx1397 - Photobucket
Are you still running the CLK rims?
I would LOVE to see your car run on some proper rubber (wider than 255)... Put some dedicated 305 slicks on the back and let that tater-chip rip.
I bet you could nail a 1.5 60'... Just needs mo' meat
I would LOVE to see your car run on some proper rubber (wider than 255)... Put some dedicated 305 slicks on the back and let that tater-chip rip.
I bet you could nail a 1.5 60'... Just needs mo' meat
Jim what is your boost under load?? Thank you Woody/// 1398 and just touched 14 for 2/1enths of a sec.
Jim, just out of curiosity, what was the best time (and speed) you remember running over 40 years ago in an AMX?// my 68 was running 12.2 in G-stock
Are you still running the CLK rims// no I have 16" but 9 1/2 wide the tires are MT streets ( bias tires they are street slicks,, not radials)
I'm surprised at the conservative timing. I expected more boost too. // this is what Rudy put into the car because he knows i push it a lot,, just ran my 122 run on the V8 engine have had it for 15 months now. and that number is doubled for the testing on the street,
got the Killer chiller installed a few days ago ,, jim.
Jim, just out of curiosity, what was the best time (and speed) you remember running over 40 years ago in an AMX?// my 68 was running 12.2 in G-stock
Are you still running the CLK rims// no I have 16" but 9 1/2 wide the tires are MT streets ( bias tires they are street slicks,, not radials)
I'm surprised at the conservative timing. I expected more boost too. // this is what Rudy put into the car because he knows i push it a lot,, just ran my 122 run on the V8 engine have had it for 15 months now. and that number is doubled for the testing on the street,
got the Killer chiller installed a few days ago ,, jim.
I also removed all heat exchangers,,, I have none the water runs from the pump to the KC,, to the intercooler,, from the intercooler,, to the tank. tank to the pump ,, this is in the testing form right now. jim
Thread
Thread Starter
Forum
Replies
Last Post
skeet370
Troubleshooting & Technical Questions & Modifications
7
May 15, 2018 12:57 PM
BrenLW
Troubleshooting & Technical Questions & Modifications
10
Aug 5, 2015 04:53 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)




