My car typically idles around 500 rpm and dips down to 400-450 rpm once in a while, especially at lights and becomes a rough idle. If I give it a little gas, or put it in neutral to raise the RPM up tp 600 RPM, all is fine.

Therefore, is there a way to raise the idle about 100 RPM so it idles at 600 RPM instead of 500 RPM?

Thanks

Ben

 

Does anyone in this forum know how to adjust the engine idle on the Crossfire?

Any help would be appreciated.

Thanks

 

Not sure there is a way to adjust the idle ? since its controlled by the ECU. I would check to make sure you dont have a vacum leak somewhere, or that something is loose and not moving around causing an intermintent vac leak, and have you tried a throttle reset yet ? you might want to do a thread search for this problem also. Hope this helps some.