Folks, good day to all!

I just purchased a set of Black/Chrome ETA wheels for my Xfire.

Would anyone know what size of lug I would need? I wonder if it
would also depend on the wheel design itself?

Any ideas, I would be grateful!!

Thanks

 

photos would be nice...are they ball seat, taper seat, off set, etc......

 

I believe the OEM bolt pattern is 5 x 112, according to other threads. Someone else will reply with more/better info.

Good luck!

-Eric

 

that is the bolt pattern, but need the proper off-set, and lug bolt length, so not to get into your calipers or parking brake on the rear...some wheels will require spacers, and proper log bolts. Some wheels have different seats as well...many here have ball seats...or rounded as it were...

 

When you install the liugs to the wheels OFF THE CAR, the threads should PROTRUDE no more than 0.75 inch. They must be at least 0.50 inch. WOODY