Relay Command Module

Reply Subscribe

Thread Tools

Jun 22, 2019 | 10:23 PM

#1 (permalink)

crossfire121

Thread Starter

Joined: Jan 2012

Posts: 57

Likes: 0

From: Portsmouth

Relay Command Module

Hello ,

Is it possible to buy the individual relays for the RCM as my fuel pump relay is dead ?

I am in the UK, Thanks

Jun 22, 2019 | 10:31 PM

#2 (permalink)

onehundred80

Senior Member

Joined: Apr 2006

Posts: 25,432

Likes: 647

From: Ontario

Re: Relay Command Module

Quote:

Originally Posted by crossfire121

Hello ,

Is it possible to buy the individual relays for the RCM as my fuel pump relay is dead ?

I am in the UK, Thanks

Here is a PDF with the relay part number in it, there are other makers of the relay naturally as the relay is a standard part. CLICK

Jun 22, 2019 | 11:43 PM

#3 (permalink)

crossfire121

Thread Starter

Joined: Jan 2012

Posts: 57

Likes: 0

From: Portsmouth

Re: Relay Command Module

Many thanks for the part number , would you know where best to purchase these relays from within the UK ??

Thanks again

Jun 23, 2019 | 12:01 AM

#4 (permalink)

crossfire121

Thread Starter

Joined: Jan 2012

Posts: 57

Likes: 0

From: Portsmouth

Re: Relay Command Module

Hello , Do you know what the relay coil resistance is please for the fuel pump relay. As 2 of the relays are 36 ohms and another 2 are 70 ohms on the RCM

Thanks again

Jun 23, 2019 | 03:36 AM

#5 (permalink)

ala_xfire

Senior Member

Joined: Dec 2010

Posts: 12,780

Likes: 184

From: Lineville, AL

Re: Relay Command Module

All 4 relays are identical. To get a true reading the relay has to be removed from the board.
The coil resistance according to the spec sheet for relay

American Zettler
AZ970E-1A-12D

is 90 ohms.

https://www.crossfireforum.org/forum...cement-rcm.pdf

Last edited by ala_xfire; Jun 23, 2019 at 03:39 AM.

Jun 23, 2019 | 09:24 AM

#6 (permalink)

onehundred80

Senior Member

Joined: Apr 2006

Posts: 25,432

Likes: 647

From: Ontario

Re: Relay Command Module

Quote:

Originally Posted by ala_xfire

All 4 relays are identical. To get a true reading the relay has to be removed from the board.
The coil resistance according to the spec sheet for relay