Troubleshooting & Technical Questions & Modifications Have technical or modification questions about the Crossfire? Find out the answer, or give advice in here!

Turns over but doesn't start

Thread Tools
 
Old Oct 8, 2020 | 07:13 AM
  #1 (permalink)  
Mike_man458's Avatar
Thread Starter
Joined: Oct 2020
Posts: 3
Likes: 0
From: LA
Default Turns over but doesn't start

Hey fellas I'm new to the famous crossfire website.i have a 05 crossfire convertible limited edition an I'm having problems with it starting I was wondering if anyone has any idea why please let me know I would appreciate it
 
Reply
Old Oct 8, 2020 | 08:09 AM
  #2 (permalink)  
ala_xfire's Avatar
Senior Member
Joined: Dec 2010
Posts: 12,780
Likes: 184
From: Lineville, AL
Default Re: Turns over but doesn't start

#1 cause of cranking but not starting is the CPS. Have you tried that ?
 
Reply
Old Oct 8, 2020 | 02:18 PM
  #3 (permalink)  
tighed1's Avatar
Senior Member
Joined: Aug 2008
Posts: 5,741
Likes: 98
From: Sierra Vista, Arizona
Default Re: Turns over but doesn't start

Any fault codes? CPS will generally give codePO335.
Turn the key to the ON position and wait 30 seconds. Does the radiator fan spin up REALLY fast?

 
Reply
Old Oct 9, 2020 | 07:01 PM
  #4 (permalink)  
Mike_man458's Avatar
Thread Starter
Joined: Oct 2020
Posts: 3
Likes: 0
From: LA
Default Re: Turns over but doesn't start

Originally Posted by ala_xfire
#1 cause of cranking but not starting is the CPS. Have you tried that ?
yea I changed both crankshaft position sensor and camshaft position sensor an still nothing I looked up on YouTube that wen u put the key in an try to start it it will turn over but want start then I'll do it again an it will do it again now the third time I try to start it there's nothing like it want even turn over people are saying something about a skreem module well I took it out an waiting till I have enough money saved then I'll buy a new one it's like $730
 
Reply
Old Oct 9, 2020 | 07:05 PM
  #5 (permalink)  
Mike_man458's Avatar
Thread Starter
Joined: Oct 2020
Posts: 3
Likes: 0
From: LA
Default Re: Turns over but doesn't start

Originally Posted by ala_xfire
#1 cause of cranking but not starting is the CPS. Have you tried that ?
Yea I changed both crankshaft position sensor and camshaft position sensor an still nothing and I checked the fuel was good and spark is good an I soldier the three points in the box by the battery an still nothing I don't know ANYMORE
 
Reply
Old Oct 10, 2020 | 11:48 AM
  #6 (permalink)  
pizzaguy's Avatar
Administrator
Joined: Jun 2009
Posts: 13,965
Likes: 1,292
From: Fort Worth, Texas
Default Re: Turns over but doesn't start

Originally Posted by Mike_man458
yea I changed both crankshaft position sensor and camshaft position sensor an still nothing I looked up on YouTube that wen u put the key in an try to start it it will turn over but want start then I'll do it again an it will do it again now the third time I try to start it there's nothing like it want even turn over people are saying something about a skreem module well I took it out an waiting till I have enough money saved then I'll buy a new one it's like $730
No, it does not cost $730 because you cant get them anymore. What you CAN do, is yank the ECU, SKREEM and pack them with a key and send it all off. The ECU can be set up to ignore the SKREEM. SOS Diagnostics and Needswings can both do the work.

Contact each and see what they charge. Perhaps it IS $700 but I was thinking the "SKREEM Bypass" was less expensive than that. Contact the two companies, ask, don't go by what others say, even me.
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
treborppal
Crossfire SRT6
1
Sep 8, 2012 03:42 PM
Smokin Red '06
Exterior & Lighting
10
May 24, 2012 05:46 PM
sue.d
Engine, Exhaust, Transmission and Differential
1
Jul 18, 2009 03:45 PM
jjg
Crossfire Coupe
7
May 31, 2009 06:34 PM
psuperti
Racing
1
Mar 14, 2009 07:13 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -4. The time now is 05:48 PM.