i replaced the heater blower resistor a few weeks ago and all was well today went to start car totally flat jump started and fans running on full pelt even with car switched off and key out is it the resistor again

 

Why are you posting in multiple categories? It just makes for confusion and less responses.

 

cos ain't got a clue what im doing on here first time joining a forum so sorrys for the inconvenience

 

Could post #3 be your issue? Do you have an owner manual?

recirculation fan will not turn off - CrossfireForum - The Chrysler Crossfire and SRT6 Resource

 

no not #3 nothing to do with the button being on as all buttons off speed off temp on cold or hot fan still runs even when car locked and i go in

 

Sounds to me like you connected the battery hot and ground leads backwards and ruined the new part.
The system is simple: The 'resistor' has five wires: a battery feed and ground feed, two wires running to the motor, and a controller wire.

If the controller wire has voltage on it, the motor runs. If there is no voltage on that lead, the motor won't run - unless the 'resistor' is bad.

 

And WHY the HELL did he not include ALL information in the other thread?
I will blow the other thread away.

THIS is why Im about done helping people.

Thread moved to a tech help section, redirect will stay for five days so no one gets lost....