Troubleshooting & Technical Questions & Modifications Have technical or modification questions about the Crossfire? Find out the answer, or give advice in here!

Parasitic Draw 2005 Crossfire SRT6

Thread Tools
 
Old Apr 22, 2026 | 08:40 PM
  #21 (permalink)  
4drturbo's Avatar
Forum Regular
Joined: Feb 2015
Posts: 325
Likes: 5
From: NA
Default Re: Parasitic Draw 2005 Crossfire SRT6

So all that needs to be done is to unplug the siren alarm, That's underneath the cowl, correct???
 
Reply
Old Apr 22, 2026 | 10:41 PM
  #22 (permalink)  
M60A3Driver's Avatar
Senior Member
Joined: May 2023
Posts: 3,180
Likes: 1,726
From: New Jersey
Default Re: Parasitic Draw 2005 Crossfire SRT6

Originally Posted by rhomohr
I think we have it figured out. After several mins amps go down to .02!! I removed the siren alarm but not sure that was the issue anyways. I wasn't letting enough time for the draw to go down. Started .6 and after few mins went down to .02. Alarm looked fine but I guess could have been the issue. No way to test that now unless I put it back in. Ill leave it out and hope we're good now. Its a convertible so doesn't really have roof lights. Thank you everyone for the help!!!
The roof lights or dome lights are on the top of the windshield on a convertible.
 
Reply
Old Apr 25, 2026 | 11:16 PM
  #23 (permalink)  
pizzaguy's Avatar
Administrator
Joined: Jun 2009
Posts: 13,965
Likes: 1,292
From: Fort Worth, Texas
Default Re: Parasitic Draw 2005 Crossfire SRT6

Originally Posted by 4drturbo
So all that needs to be done is to unplug the siren alarm, That's underneath the cowl, correct???
IF that is what is the source of the excessive current, yes.
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Vetteguy
Troubleshooting & Technical Questions & Modifications
23
Apr 18, 2026 10:44 PM
Ozzie007
Crossfire Coupe
16
May 23, 2022 06:34 PM
Nrbridges
New Member Introductions
19
Apr 16, 2019 05:55 PM
craftykates@mail.com
Troubleshooting & Technical Questions & Modifications
15
Jan 12, 2019 09:56 PM
Sarx
Crossfire Coupe
10
Feb 19, 2008 05:00 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -4. The time now is 02:10 PM.