I'm looking to fit day running lights.

Rather than remove all the trim around/under the streering wheel to gain acces to a live
ignition feed...Where is the best other place to get a live feed from


UKKen

 

Fuse box under bonnet close to firewall on US drivers side. Not sure where it is on your cars. There is a stud terminal that is live upon the ignotion getting turned on near the very back close to the firewall.
I'll post up a previous thread later.

 

Hope this helps :https://www.crossfireforum.org/forum...tml#post645463

Click on the pics in this post.

 

Sparkie SRT6..

Thanks for the info..I had no idea there was a live contact there. Make life much easier. Will update you later.

Again, a BIG thank you

UKKen

 

One more question...How do I wire them up, so that they switch off when I use head, dip, fog lights, or side parking lights

UKKen

 

Why do you want them to switch off I would imagine it will take some fancy wiring to get them to turn off when heads or fogs are turned on

 

If you REALLY want them off when normal lights are on, then run the switched ignition wire through the normally closed contacts of a SPDT relay, drive the relay coil from the hot lead to one of the eyebrow lights.

 

is this the gizmo you need ken...
http://www.ebay.co.uk/itm/DRL-Daytim...item20cc4b477c
or


Daytime Running lights (DRL) Auto switch relay | eBay
or
http://www.ebay.co.uk/itm/UNIVERSAL-...item35c732b3df

 

Thanks Chris..just what I wanted...Now its a case of fitting them.. Next weel I think.


See you Suinday for lunch. ish...Me not the lunch!
UKKen
.