Can anyone help me on my offsets? Some calculaters say 25R and 35F and others say both at 35...35 on the rear seems to decrease outer by 7mm and decrease inner clearance by 19mm from OEM. 25 on the rear would increase outer to an extra 3mm and decrease inner clearance by 9mm...help.

My crossfire is stock...currently has OEM wheels and 295/30ZR19 rears and 225/40ZR18 fronts. Have not had one issue with this combo for the last 35,000 miles.

Changing out to Mandrus Wilhelm's...19x9.5 with either 295/30ZR19 or 305/30ZR19 and 18x8.5 with 235/40ZR18.

Thanks in advance...

 

32 front and 25 rear if your going with the wilhelms. Dont have a front flush shot but here is rear. 285 30 19 on 19x9.5 et 25. I went 225 front but they are a little tight, 235 should be perfect.

 

Thanks Airscape...they look sweet!

Would love to see the rear profile if you have that pic...

You said the front 225's were tight...are they on 18x8.5's?

 

Rest of the pics I have are in this post

Yes on the 8.5, they don't look too stretched but not nice and flush like the rears. I lowered so I didn't know if the extra height of the 235 would cause problems with rubbing. Will be getting 235 when these wear down

 

I'm ordering them this week...Thanks again!