All Crossfires A place to discuss any model of the Crossfire.

What did you do to your Crossfire today?

Old Aug 8, 2020 | 02:09 PM
  #6841 (permalink)  
onehundred80's Avatar
Senior Member
Joined: Apr 2006
Posts: 25,432
Likes: 650
From: Ontario
Default Re: What did you do to your Crossfire today?

Originally Posted by rbracy10406
I finally got some time to work on my crossfire again and continued my journey to add more wires than the manufacturer. This time I am adding a 360 birds eye camera system that also doubles as a dash cam. It will have a camera under each side mirror, one under the rear hatch by the handle and one in the front grill. The controller stitches the video from the four cameras together to create a birds eye view of the car while you are parking. It also records the full fisheye view of each camera onto a USB for playback if needed. I have this system on my S4 as well and I am a big fan of it. I plan to have the the car display the 360 view and backup view on the main screen in the center console and view the side views when I use the turn signals on the gauge cluster. I'll post a video when its all wrapped up together



The wire hole in the mirror was just big enough to run the camera wire through. I really lucked out on this one

The camera sticks down just far enough to get an image from the back side making it not visible from the drivers seat
Thanks, I like the look of that, is it this one CLICK.
 
Reply
Old Aug 8, 2020 | 02:21 PM
  #6842 (permalink)  
rbracy10406's Avatar
Joined: May 2016
Posts: 66
Likes: 10
From: New Jersey
Default Re: What did you do to your Crossfire today?

Originally Posted by onehundred80
Thanks, I like the look of that, is it this one CLICK.
This is the one I used. I have had the same thing in my other car for over a year now without any issues

Amazon Amazon
 
Reply
Old Aug 8, 2020 | 03:49 PM
  #6843 (permalink)  
rbracy10406's Avatar
Joined: May 2016
Posts: 66
Likes: 10
From: New Jersey
Default Re: What did you do to your Crossfire today?

Originally Posted by onehundred80
Thanks, I like the look of that, is it this one CLICK.
Althoug looking further into that one, its pretty much the same. I stumbled upon this one at the bottom of that page too. It gives a 3d image of the car that you can pan around. I may try to pick that one up after I get this going. It looks like it has the same connection sobI should be able to swap it over

Link
 
Reply
Old Aug 8, 2020 | 04:25 PM
  #6844 (permalink)  
ZERACER's Avatar
Senior Member
Joined: Nov 2006
Posts: 6,650
Likes: 777
From: Orange County CA.
Default Re: What did you do to your Crossfire today?

If you could get extra cable that would be great for RVs too.
 
Reply
Old Aug 8, 2020 | 04:34 PM
  #6845 (permalink)  
rbracy10406's Avatar
Joined: May 2016
Posts: 66
Likes: 10
From: New Jersey
Default Re: What did you do to your Crossfire today?

Originally Posted by ZERACER
If you could get extra cable that would be great for RVs too.
Here you go
Link Link
 
Reply
Old Aug 8, 2020 | 04:56 PM
  #6846 (permalink)  
dedwards0323's Avatar
Senior Member
Joined: Nov 2008
Posts: 8,494
Likes: 856
From: Upstate SC
Default Re: What did you do to your Crossfire today?

Originally Posted by rbracy10406
I finally got some time to work on my crossfire again and continued my journey to add more wires than the manufacturer. This time I am adding a 360 birds eye camera system that also doubles as a dash cam. It will have a camera under each side mirror, one under the rear hatch by the handle and one in the front grill. The controller stitches the video from the four cameras together to create a birds eye view of the car while you are parking. It also records the full fisheye view of each camera onto a USB for playback if needed. I have this system on my S4 as well and I am a big fan of it. I plan to have the the car display the 360 view and backup view on the main screen in the center console and view the side views when I use the turn signals on the gauge cluster. I'll post a video when its all wrapped up together



The wire hole in the mirror was just big enough to run the camera wire through. I really lucked out on this one

The camera sticks down just far enough to get an image from the back side making it not visible from the drivers seat
Looking forward to following this post. Very Interesting!
 
Reply
Old Aug 8, 2020 | 05:58 PM
  #6847 (permalink)  
ZERACER's Avatar
Senior Member
Joined: Nov 2006
Posts: 6,650
Likes: 777
From: Orange County CA.
Default Re: What did you do to your Crossfire today?

Thanks!
 
Reply
Old Aug 8, 2020 | 08:21 PM
  #6848 (permalink)  
WD40's Avatar
Forum Regular
Joined: May 2019
Posts: 756
Likes: 138
From: Alabama
Default Re: What did you do to your Crossfire today?

Originally Posted by dedwards0323
Looking forward to following this post. Very Interesting!
Yes, will be interesting what the images on screen actually look like. I've installed a backup camera but having blind-spot monitors would make driving in rush-hour/heavy traffic easier & less-stressful! No one ever said the Crossfire was easy to see out of (with the top up). The next time you drive a 1960s or even most 1970s cars notice how slim the pillars are and the high percentage of glass that is at your sight-level. Before roll-over standards took effect cars were much easier to see out of.
 
Reply
Old Aug 8, 2020 | 09:47 PM
  #6849 (permalink)  
rbracy10406's Avatar
Joined: May 2016
Posts: 66
Likes: 10
From: New Jersey
Default Re: What did you do to your Crossfire today?

Originally Posted by WD40
Yes, will be interesting what the images on screen actually look like. I've installed a backup camera but having blind-spot monitors would make driving in rush-hour/heavy traffic easier & less-stressful! No one ever said the Crossfire was easy to see out of (with the top up). The next time you drive a 1960s or even most 1970s cars notice how slim the pillars are and the high percentage of glass that is at your sight-level. Before roll-over standards took effect cars were much easier to see out of.
Yeah I know what you mean. I installed four radar sensors in my rear bumper a couple years back for that reason. Two are for backing up and the other two are for blind spot sensing. I went with the radar sensors instead of ultrasonic because you can hide them behind the bumper and they will work through the plastic. No drilling holes or signs they are even there


The two in the center are for backing up

One of the side blind spot sensors


 
Reply
Old Aug 9, 2020 | 05:08 PM
  #6850 (permalink)  
rbracy10406's Avatar
Joined: May 2016
Posts: 66
Likes: 10
From: New Jersey
Default Re: What did you do to your Crossfire today?

Today I mounted the rear camera and printed a test bracket for the front camera. I'm going to make some adjustments for fitment and make a final high quality print that I can sand, mount and paint to match the grill

 
Reply
Old Aug 9, 2020 | 09:15 PM
  #6851 (permalink)  
Angelospinner's Avatar
Joined: Sep 2007
Posts: 60
Likes: 0
Default Re: What did you do to your Crossfire today?

New top installed.
 
Reply
Old Aug 9, 2020 | 09:40 PM
  #6852 (permalink)  
WD40's Avatar
Forum Regular
Joined: May 2019
Posts: 756
Likes: 138
From: Alabama
Default Re: What did you do to your Crossfire today?

Originally Posted by Angelospinner
New top installed.
Nice! I've thought of going tan/beige when the time comes. I also have an alabaster Limited. It's nice to see colors other than boring old black. Variety is the spice of life.
 
Reply
Old Aug 9, 2020 | 10:13 PM
  #6853 (permalink)  
Valk's Avatar
Administrator / Senior Member / Retired
Joined: Jul 2007
Posts: 18,129
Likes: 1,612
From: Aurora , ILL
Default Re: What did you do to your Crossfire today?

Cleaned my Magnaflow and got a pic by the old church down the road





 
Reply
Old Aug 10, 2020 | 08:22 AM
  #6854 (permalink)  
dedwards0323's Avatar
Senior Member
Joined: Nov 2008
Posts: 8,494
Likes: 856
From: Upstate SC
Default Re: What did you do to your Crossfire today?

Originally Posted by Valk

Nice picture.
 
Reply
Old Aug 10, 2020 | 09:24 AM
  #6855 (permalink)  
richb55's Avatar
Joined: Nov 2019
Posts: 147
Likes: 25
From: Boston
Default Re: What did you do to your Crossfire today?

New shocks & springs all around , installed JVC Bluetooth stereo , buffed out faded headlight covers ( meguires kit) replaced license plate bulbs with LED’s

Cabin filters were a mess as well
 
Reply
Old Aug 10, 2020 | 09:27 AM
  #6856 (permalink)  
richb55's Avatar
Joined: Nov 2019
Posts: 147
Likes: 25
From: Boston
Default Re: What did you do to your Crossfire today?

Here’s the finished product


Here’s the finished project .... for now
 
Reply
Old Aug 13, 2020 | 03:06 PM
  #6857 (permalink)  
GraphiteGhost's Avatar
Senior Member
Joined: Jul 2009
Posts: 6,372
Likes: 810
From: Central South Carolina
Default Re: What did you do to your Crossfire today?

.


Second brake lamp bulb replaced today (since ownership new in 2009). Leaving home for a doctors appointment, up pops the 'bulb out' idiot lamp. Quick check of lights all working fine. Asked Mrs to watch brake lights (can't hit brake and look at lights at the same time) and bingo! As I was going to doctors appointment, who should I come up upon, but a Sheriffs deputy in the left lane of a 4 lane road... So since he was going below the speed limit, and I was going the speed limit, I passed him. He drops in behind me and I wait for the lights to hit me. Coming up to a light, he pulls up on my left and looks me over. I wave, give him a 'thumbs-up', and off I go when the light changes. After the docs app, I go shopping at WalMart and pick up a twin pack of the correct 21/5 bulbs. Swapped one in and away I go! No more bulb out idiot lamp! So far so good for today! Now if only the pop-up storms would stop so I could give her a good wash/wax job!


.
 
Reply
Old Aug 13, 2020 | 09:32 PM
  #6858 (permalink)  
Ronman's Avatar
Forum Regular
Joined: Mar 2004
Posts: 779
Likes: 96
Default Re: What did you do to your Crossfire today?

Originally Posted by richb55
Here’s the finished product


Here’s the finished project .... for now
Your muffler is loose on the left side? Are you missing the left side rubber isolator or working on the muffler by chance?
 
Reply
Old Aug 14, 2020 | 12:25 AM
  #6859 (permalink)  
richb55's Avatar
Joined: Nov 2019
Posts: 147
Likes: 25
From: Boston
Default Re: What did you do to your Crossfire today?

Originally Posted by Ronman
Your muffler is loose on the left side? Are you missing the left side rubber isolator or working on the muffler by chance?
no rattles , next time I’m underneath I’ll check it out. Good looking out 👍
 
Reply
Old Aug 14, 2020 | 11:13 AM
  #6860 (permalink)  
Ronman's Avatar
Forum Regular
Joined: Mar 2004
Posts: 779
Likes: 96
Default Re: What did you do to your Crossfire today?

Originally Posted by richb55
no rattles , next time I’m underneath I’ll check it out. Good looking out 👍
You don't have to be underneath it. Look above the exhaust tips and you should have a rubber isolator on each side that mounts it to the body. Then there should be one in the middle that just points down. For sure the one on the left fell off, is missing or broken. They are not expensive but hard to put on.
 
Reply


All times are GMT -4. The time now is 04:34 PM.