Double Din Project: Disassembling question
Double Din Project
UPDATE 06-26-2015
PROJECT FINALLY DONE !
- 2005 SRT-6 AeroBlue
- Nexus 7 2013 Wifi Tablet
- Backup Camera, Display when Reverse shifted
- Sound Wired to car speakers
- Mobile Hotspot to share 4G to Tablet via Wifi
- USB Hub to add other devices
- Bluetooth Control for Music
- Start when car ON and Stop when car OFF
- OBDII bluetooth connector to use with Torque PRO
And last but not the least:
- Tablet is removable anytime by sliding it. So I can bring it home to make updates
06-29-2015
The only problem remaining is to bring the rearview camera cable from the trunk to the center console in a hidden way
Here are the pictures:
Little bonus, when I shutdown the car
--------------
Hello all,
I am on a project of installing a double din solution on my Crossfire SRT-6 Aero Blue
Right now I have trouble with 2 thing:
- Installing the RearView Camera
- Adding a power source by adding wire circuit from the fusebox to the inside of the car
My questions are:
1 - How to pass the cables of the rearview camera from the license plate to the inside of the trunk ? I checked and I did not see an easy way to do it
DONE
2 - How to pass cables from the underhood fusebox to inside the dash bezel
I changed my mind, and will take the power directly from the ACC wire from the stock harness
3 - How to plug RCAs cable to the stock harness ?
I am looking to plug a USB DAC ( ) directly to the stock harness to output the sound of the tablet to the AMP
Any guidance ?
Its a very exciting project and the first one on my Crossfire, so I dont want to mess up
Thanks you guys
When the project will be done I will post pictures for sure
PROJECT FINALLY DONE !
- 2005 SRT-6 AeroBlue
- Nexus 7 2013 Wifi Tablet
- Backup Camera, Display when Reverse shifted
- Sound Wired to car speakers
- Mobile Hotspot to share 4G to Tablet via Wifi
- USB Hub to add other devices
- Bluetooth Control for Music
- Start when car ON and Stop when car OFF
- OBDII bluetooth connector to use with Torque PRO
And last but not the least:
- Tablet is removable anytime by sliding it. So I can bring it home to make updates
06-29-2015
The only problem remaining is to bring the rearview camera cable from the trunk to the center console in a hidden way
Here are the pictures:
Little bonus, when I shutdown the car
--------------
Hello all,
I am on a project of installing a double din solution on my Crossfire SRT-6 Aero Blue
Right now I have trouble with 2 thing:
- Installing the RearView Camera
- Adding a power source by adding wire circuit from the fusebox to the inside of the car
My questions are:
1 - How to pass the cables of the rearview camera from the license plate to the inside of the trunk ? I checked and I did not see an easy way to do it
DONE
2 - How to pass cables from the underhood fusebox to inside the dash bezel
I changed my mind, and will take the power directly from the ACC wire from the stock harness
3 - How to plug RCAs cable to the stock harness ?
I am looking to plug a USB DAC ( ) directly to the stock harness to output the sound of the tablet to the AMP
Any guidance ?
Its a very exciting project and the first one on my Crossfire, so I dont want to mess up
Thanks you guys
When the project will be done I will post pictures for sure
Last edited by massanu; 06-28-2015 at 11:46 PM.
Re: Double Din Project: Disassembling question
Just a question about this "pass-thru"
DO you know where its ending ? I mean will I need to unmount a lot of interior part to get the cable back from the pass-thru ?
Thanks man, I appreciate
Re: Double Din Project: Disassembling question
I updated the first post, I did the backup camera wiring
I would appreciate some guidance on how to plug RCA cables to the stock harness to output the sound directly to the amp without accessing it
What do you think about that ?
Here is a diagram to explain what I want to do (clickable image)
Link to full size image
http://s23.postimg.org/i203vetcb/diagram.jpg
I would appreciate some guidance on how to plug RCA cables to the stock harness to output the sound directly to the amp without accessing it
What do you think about that ?
Here is a diagram to explain what I want to do (clickable image)
Link to full size image
http://s23.postimg.org/i203vetcb/diagram.jpg
Last edited by massanu; 02-16-2015 at 03:32 AM.
Re: Double Din Project: Disassembling question
You mean one of these?? And if you do... hope you are pushing 4V at the output.. or your not going to like the result.
Metra 70-1786 Receiver Wiring Harness Connect a new car stereo in select 1994-2008 Chrysler, Land Rover, Mercedes, and Saab vehicles at Crutchfield.com
Metra 70-1786 Receiver Wiring Harness Connect a new car stereo in select 1994-2008 Chrysler, Land Rover, Mercedes, and Saab vehicles at Crutchfield.com
Re: Double Din Project: Disassembling question
The harness has 4 RCA connectors - OEM amp only uses the "front" channel since there is no "front-rear" fader on OEM head units. I've got one in my parts stash (adapter) and I'd bet where the other two RCA plugs go into the connector there is no corresponding wiring in the cars harness connector. Seems to me if you had a 4 channel setup.. that DAC unit is only going to play out of the front or rears only.. not both..
OEM amp is 4 channel - but the inputs at the amp end merely split the front channel L/R to feed front and rear speakers.
OEM amp is 4 channel - but the inputs at the amp end merely split the front channel L/R to feed front and rear speakers.
Re: Double Din Project: Disassembling question
Ok I tried today
I cut one end of the RCA wires and plugged them to the Harness using a wire crimp
I plugged to :
- White/White and Black
- Gray/Gray and Black
Based on this schema
But I got no sound on the speakers at all.
Maybe I forgot something ?
I cut one end of the RCA wires and plugged them to the Harness using a wire crimp
I plugged to :
- White/White and Black
- Gray/Gray and Black
Based on this schema
But I got no sound on the speakers at all.
Maybe I forgot something ?
Re: Double Din Project: Disassembling question
Thats a great catch !
But what should I plug into the #5 blue/white ? (what kind of source is it expecting)
I looked online and I guess the #5 need a 12v input, only the positive wire ? Am I Right ?
But what should I plug into the #5 blue/white ? (what kind of source is it expecting)
I looked online and I guess the #5 need a 12v input, only the positive wire ? Am I Right ?
Last edited by massanu; 02-21-2015 at 08:52 PM.
Re: Double Din Project: Disassembling question
Good luck with it.. Post up the end results..
Re: Double Din Project: Disassembling question
You have to make it yourself or pay a car audio shop to do it
Re: Double Din Project: Disassembling question
I've just completed a Double Din Install on my 2005 roadster. What a project. Go for it if you have free evenings for 2 months. I posed the pics in Photos.
Mounted the camera on the desk lid and ran the cable through the flex cable be careful when doing it this way. I accidentilly drilled through the rod from the air pressure lock (lucky to find a replacement on eBay/new was $350 from the dealer) . If you have questions I can walk you through them. I ran into every snag imaginable
Mounted the camera on the desk lid and ran the cable through the flex cable be careful when doing it this way. I accidentilly drilled through the rod from the air pressure lock (lucky to find a replacement on eBay/new was $350 from the dealer) . If you have questions I can walk you through them. I ran into every snag imaginable
Re: Double Din Project: Disassembling question
Is the audio shop going to fabricate all of the parts? It's not a big job but it sure does consume a lot of time with respect to finishing. I had to pull all of the console parts sand and paint them all to match.
Which head unit did you select?
I went with Kenwood DNX 771HD for nav, rear camera, xm, HDMI and Bluetooth. HERES. Tip if hooking up the HDMI just ground it to complete the circuit. Don't wire it to the parking break. If you wire it to the break, you'll only be able to use it when stopped and the brake engaged.
Btw you can also split the rear speakers from the front, there are lots of threads in the forum as to how to do this.
If hooking up the rear camera let me know and I'll tell you where the wire is located just outside the shifter
Send images
Which head unit did you select?
I went with Kenwood DNX 771HD for nav, rear camera, xm, HDMI and Bluetooth. HERES. Tip if hooking up the HDMI just ground it to complete the circuit. Don't wire it to the parking break. If you wire it to the break, you'll only be able to use it when stopped and the brake engaged.
Btw you can also split the rear speakers from the front, there are lots of threads in the forum as to how to do this.
If hooking up the rear camera let me know and I'll tell you where the wire is located just outside the shifter
Send images
Re: Double Din Project: Disassembling question
Project over :-)
The only problem remaining is to bring the rearview camera cable from the trunk to the center console in a hidden way
If anyone have an idea let me know
See pictures on the first post !
The only problem remaining is to bring the rearview camera cable from the trunk to the center console in a hidden way
If anyone have an idea let me know
See pictures on the first post !
Last edited by massanu; 06-28-2015 at 11:04 PM.