Low Beam Headlight Adjustment
Low Beam Headlight Adjustment
Got all the info to adjust the RT head light. I tried to re position the low beam bulb but it did not help. It seems to be positioned properly.
If I adjust the the RT light won't that also affect the high beam?
My only other idea is to unhook the lock bale on the bulb and hook the connector and move the light in the socket and see if that will help me find the correct position.
The RT low beam hits only a few feet from the car but the RT high beam is fine. Left low/high beams are fine.
Thanks
OldSalt
If I adjust the the RT light won't that also affect the high beam?
My only other idea is to unhook the lock bale on the bulb and hook the connector and move the light in the socket and see if that will help me find the correct position.
The RT low beam hits only a few feet from the car but the RT high beam is fine. Left low/high beams are fine.
Thanks
OldSalt
Join Date: Sep 2007
Location: MOFN, AL, 70 miles from George
Age: 66
Posts: 8,017
Likes: 0
Received 7 Likes
on
7 Posts
Re: Low Beam Head Light Adjustment
Originally Posted by OldSalt
Got all the info to adjust the RT head light. I tried to re position the low beam bulb but it did not help. It seems to be positioned properly.
If I adjust the the RT light won't that also affect the high beam?
My only other idea is to unhook the lock bale on the bulb and hook the connector and move the light in the socket and see if that will help me find the correct position.
The RT low beam hits only a few feet from the car but the RT high beam is fine. Left low/high beams are fine.
Thanks
OldSalt
If I adjust the the RT light won't that also affect the high beam?
My only other idea is to unhook the lock bale on the bulb and hook the connector and move the light in the socket and see if that will help me find the correct position.
The RT low beam hits only a few feet from the car but the RT high beam is fine. Left low/high beams are fine.
Thanks
OldSalt
Re: Low Beam Head Light Adjustment
Ok I noticed this yesterday playing with mine. The adjustment screw is cheap plastic. I wanted them as high as possible. Screwing out will move them up but I turned it too far and the plastic screw popped out. The end of the screw has a ball shape to it that fits into the housing that must have socket hole. To reseat it I had to screw it all the way in till it pops back in. Then screw it out but not too far or the ball will pop out again. Hope this helps.
Thread
Thread Starter
Forum
Replies
Last Post
onehundred80
TSBs and How-To Articles
100
03-19-2020 06:01 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)