Help "flywheel" needed...
To my fellow members I am new to this, and with that said, I took my 2004 crossfire to the shop with a clutch problem (the Patel went straight to the floor,)after sitting for 3 months. I was then told some hours later that I need a flywheel (that they can't find) and a new clutch kit. Oh my...
also the flywheel would cost $17-2,300 and the clutch kit 600+. Do anyone have any info on a flywheel new or used?
also the flywheel would cost $17-2,300 and the clutch kit 600+. Do anyone have any info on a flywheel new or used?
The pedal going to the floor does not mean you need a flywheel and clutch. These clutches are hydraulic, fluid and master/slave cylinder issues can explain the pedal behavior.
This sounds asinine. Let's wait to see what the more mechanically experienced say.
Moved to appropriate forum...
This sounds asinine. Let's wait to see what the more mechanically experienced say.
Moved to appropriate forum...
As the engine and transmission are the same as an SLK320 I would expect this would work:
https://www.ebay.com/itm/Flywheel-Fo...ODo8#vi-ilComp
I also absolutely agree the pedal going to the floor is not a flywheel problem.
https://www.ebay.com/itm/Flywheel-Fo...ODo8#vi-ilComp
I also absolutely agree the pedal going to the floor is not a flywheel problem.
Last edited by Toolman; Mar 1, 2021 at 08:58 PM.
To my fellow members I am new to this, and with that said, I took my 2004 crossfire to the shop with a clutch problem (the Patel went straight to the floor,)after sitting for 3 months. I was then told some hours later that I need a flywheel (that they can't find) and a new clutch kit. Oh my...
also the flywheel would cost $17-2,300 and the clutch kit 600+. Do anyone have any info on a flywheel new or used?
also the flywheel would cost $17-2,300 and the clutch kit 600+. Do anyone have any info on a flywheel new or used?
If your flywheel and clutch is bad you certainly would have known it before you parked it.
The clutch pedal going to the floor is not related to a bad flywheel. If it worked before sitting for 3 months, you probably need to bleed the slave cylinder or look for a leak.
If your flywheel and clutch is bad you certainly would have known it before you parked it.
If your flywheel and clutch is bad you certainly would have known it before you parked it.
Thread
Thread Starter
Forum
Replies
Last Post
ozkancab
Crossfire Coupe
11
Feb 20, 2018 09:25 AM
srt8guy
Troubleshooting & Technical Questions & Modifications
2
Oct 15, 2010 10:17 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



