Alarm fault
Alarm fault
Can anyone help
I had a problem with the alarm going off for no reason. The dealer had it in and charged the battery saying it was slightly down. I took no chances and changed the battery. I still have the same problem. Iv just noticed that the little red light in the roof near the mirror is staying on after the engine is switched off. Pressing it does nothing,it just stays on. The only time it goes out is when the engine is running. May be this is the reason for the battery drain. Does anyone know how to reset the alarm or is this some thing else?
Help
Jon
I had a problem with the alarm going off for no reason. The dealer had it in and charged the battery saying it was slightly down. I took no chances and changed the battery. I still have the same problem. Iv just noticed that the little red light in the roof near the mirror is staying on after the engine is switched off. Pressing it does nothing,it just stays on. The only time it goes out is when the engine is running. May be this is the reason for the battery drain. Does anyone know how to reset the alarm or is this some thing else?
Help
Jon
Re: Alarm fault
Originally Posted by UK ken
Hi Jon Sadly no idea re the alarm fault. Did the main dealer have any thoughts re the problem? Maybe contact another main Chysler garage and ask the question again.
Hope to touch base soon.
Cheers
Ken.
Hope to touch base soon.
Cheers
Ken.
If no joy here. I will call another dealer next week.
Catch up with you soon.
Jon
Re: Alarm fault
Hi Jon,
Isn't the little red light supposed to go out after a few seconds, indicating that the device (for remotely opening garage door or electric gates) is ready to use. There is something in the handbook about setting it up I think. The light is very small (like the flashing flashing alarm light) and shouldnt drain the battery. If its faulty and staying on; it could interfere with the alarm, so njust disconect it by prizing off the panel and pulling the wires, and see if that cracks it!
Good luck!
Isn't the little red light supposed to go out after a few seconds, indicating that the device (for remotely opening garage door or electric gates) is ready to use. There is something in the handbook about setting it up I think. The light is very small (like the flashing flashing alarm light) and shouldnt drain the battery. If its faulty and staying on; it could interfere with the alarm, so njust disconect it by prizing off the panel and pulling the wires, and see if that cracks it!
Good luck!
Re: Alarm fault
Hi Jon,
Its a strange one, I cant think what could cause it to stay on, unless there is some kind of reset you can do. Have you checke3d out the hand book yet?
I will check it out on mine when I get the car back, its having major surgery at the moment and expect to get it back later this week!
Cheers,
Steve
Its a strange one, I cant think what could cause it to stay on, unless there is some kind of reset you can do. Have you checke3d out the hand book yet?
I will check it out on mine when I get the car back, its having major surgery at the moment and expect to get it back later this week!
Cheers,
Steve
Re: Alarm fault
Originally Posted by Steve - UK
Hi Jon,
Its a strange one, I cant think what could cause it to stay on, unless there is some kind of reset you can do. Have you checke3d out the hand book yet?
I will check it out on mine when I get the car back, its having major surgery at the moment and expect to get it back later this week!
Cheers,
Steve
Its a strange one, I cant think what could cause it to stay on, unless there is some kind of reset you can do. Have you checke3d out the hand book yet?
I will check it out on mine when I get the car back, its having major surgery at the moment and expect to get it back later this week!
Cheers,
Steve
I forgot about yours. How's that getting on?
Just to rub a bit of salt in the wound, it looks like some one has thrown a brick at mine. I now have two dents in the roof to repair. Great!!!!!!!!
I will take a look in my hand today.
Thanks
Jon
Re: Alarm fault
Originally Posted by The bodyman
Hi Steve.
I forgot about yours. How's that getting on?
Just to rub a bit of salt in the wound, it looks like some one has thrown a brick at mine. I now have two dents in the roof to repair. Great!!!!!!!!
I will take a look in my hand today.
Thanks
Jon
I forgot about yours. How's that getting on?
Just to rub a bit of salt in the wound, it looks like some one has thrown a brick at mine. I now have two dents in the roof to repair. Great!!!!!!!!
I will take a look in my hand today.
Thanks
Jon
Cheers - Steve
Thread
Thread Starter
Forum
Replies
Last Post
pioneer4x4
All Crossfires
8
07-01-2021 10:56 AM
pioneer4x4
Troubleshooting & Technical Questions & Modifications
11
03-25-2019 10:35 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)