Lights in rocker panels
Thread Starter
|
Senior Member
Joined: Apr 2006
Posts: 25,432
Likes: 650
From: Ontario
Lights in rocker panels
Does anyone know if there is room behind the rocker panels to put an LED light such as the license plate light under the doors that light up when you unlock the door, coming on with the interior lights? A neat feature I think when used at night.
They would come on when you unlocked the doors, opened the doors from inside etc. They would need to be pretty thin, I think you could thin the license plate lights by modifying the terminals.
They would come on when you unlocked the doors, opened the doors from inside etc. They would need to be pretty thin, I think you could thin the license plate lights by modifying the terminals.
Senior Member
Joined: Oct 2008
Posts: 3,140
Likes: 83
From: Grimsby, Ontario
Re: Lights in rocker panels
Dave, if the LED LP lights won't fit, you could put a strip of LED lights on the outside surface of the trim panel, there's a linear indentation where the fasteners are. I think an LED strip would be thin enough to go under the door as well.
Thread Starter
|
Senior Member
Joined: Apr 2006
Posts: 25,432
Likes: 650
From: Ontario
Re: Lights in rocker panels
I have some about 6” long x 3/4” wide that say they are 100% waterproof and stick on with 3M double sided tape, maybe they might do with a bit more waterproofing.. I had forgot I had them till you mentioned them.
Senior Member
Joined: Feb 2009
Posts: 1,002
Likes: 55
From: Philadelphia, PA
Re: Lights in rocker panels
A trick to find the gap between doors and door jams, or air cleaner box and hood, is to use Silly Putty on one surface with the other side of the putty covered with plastic wrap. Shut the door or hood and it will squash the putty to the thickness of the gap. The plastic wrap stops the putty from sticking on the surface on that side.
Thread Starter
|
Senior Member
Joined: Apr 2006
Posts: 25,432
Likes: 650
From: Ontario
Re: Lights in rocker panels
A trick to find the gap between doors and door jams, or air cleaner box and hood, is to use Silly Putty on one surface with the other side of the putty covered with plastic wrap. Shut the door or hood and it will squash the putty to the thickness of the gap. The plastic wrap stops the putty from sticking on the surface on that side.
I prefer the license plate light as I think the stick on ones are a bit tacky.��
Last edited by onehundred80; Oct 22, 2018 at 11:52 AM.
Senior Member
Joined: May 2008
Posts: 10,460
Likes: 159
From: Cincinnati ( Delhi )
Re: Lights in rocker panels
I would mount them on the bottom of the door jams. Mounted on the rockers, too much crap from the road will get on them, not to mention driving water from the front wheels when it is raining.
Thread Starter
|
Senior Member
Joined: Apr 2006
Posts: 25,432
Likes: 650
From: Ontario
Re: Lights in rocker panels
That is a fair option but I would like to see the puddle when I unlock the door not open it and find I am standing in one.
Senior Member
Joined: Nov 2007
Posts: 2,374
Likes: 9
From: Lafayette, Indiana
Re: Lights in rocker panels
I'm with you, just as soon they came on before I got there and lit up underneath.
Thread Starter
|
Senior Member
Joined: Apr 2006
Posts: 25,432
Likes: 650
From: Ontario
Re: Lights in rocker panels
Senior Member
Joined: Oct 2008
Posts: 3,140
Likes: 83
From: Grimsby, Ontario
Re: Lights in rocker panels
https://www.ebay.ca/itm/2-PCS-Door-L...7:pf:0&vxp=mtr
Thread Starter
|
Senior Member
Joined: Apr 2006
Posts: 25,432
Likes: 650
From: Ontario
Re: Lights in rocker panels
I have them for the GLK, they simply replace the OEM ones in the doors.
https://www.ebay.ca/itm/2-PCS-Door-L...7:pf:0&vxp=mtr
https://www.ebay.ca/itm/2-PCS-Door-L...7:pf:0&vxp=mtr
Thread Starter
|
Senior Member
Joined: Apr 2006
Posts: 25,432
Likes: 650
From: Ontario
Re: Lights in rocker panels
Run wires from inside the car connected to a circuit that becomes live with the doors open, as shown here, CLICK. Then run the wire forward under the carpet and come up and over the sill where it is covered by the sill cap which has CROSSFIRE embossed on it. Run it along the side of the sill and put the wires through the gap at the forward edge of the rocker cover.
There may be better ways to run the wires upon more thought.
After all how hard could it be?
There may be better ways to run the wires upon more thought.
After all how hard could it be?
Thread
Thread Starter
Forum
Replies
Last Post
T. K. D.
WTB - Items/Parts Wanted to Buy - Archive
0
Mar 25, 2016 06:32 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
