I apologize for possibly coming off sounding like a **** but with your last comment, the real question is where is the one you were making back in May? How's that liquid ABS working out for ya?

BTW, one of our's is in Jonny's car and the other is hangin out at the shop till I can get everything figured out with the NoKeyGo system and then it's going in mine. How shi tty is that.

 

\

PM me for details if you are intrested I am sure we can work with what you have got.

 

Jonny, your dash and console look great! But you need to get the vaccume out man...

MikeR

 

hah ha old pics mike here is the most recent

 

My bad. Yeah that was right after it all went together. Truth be told, that's the dirtiest his car has ever been. LOL I'd eat off the floor in his car any other day he keeps it so clean.

 

Any update on getting a center console from y'all for installing a double DIN unit?

I like the last setup with the double DIN unit just below the HVAC controls but switches staying below the unit and the ashtray/airbag light/cigar lighter removed.

 

+1 on that i have been waiting on that cause i have a double din waiting for the car

 

Bump... and i really like the color. The stock aluminum look is nice but I like the gray a lot better.

 

hey JR this is just a thought but it may help you guys out in lowering and mass producing the center dash and console panel , The company i have been working at for the past 2 years (just got laid off ) , did thermo molded composite prototypes for the gov , and high end racers. Im sure you guys don't want to invest in thermo molding but have you thought of casting a mold off one of the hand built parts and then resin molding parts out of glass ? or ....carbon

 

bump.... hoping for an update on this

 

i Guys.....

I'm selling a center console face place and the plate where the mirror switch goes also, so you can start your own project for the double Dim unit and to move the switches to the new location..... with this you don't have to risk your vehicle plates if something goes wrong.....

I bought them a couple of months ago to start my own project, but I have decided to sell my lovely but useless crossfire.........

Price for both pieces are $150 + $20 Shipping.... more information, contact me to betico@me.com

Thanks... Jorge

 

Please take no insult but those pieces are very over priced based on what LKQ or other parts sellers are asking. I have in the past, paid anywhere from $30-$50 for the center and both times, it included switches and the $50 included the climate control as well. You may want to try eBay and I don't know if i dare say it but catch some unsusepcting victim at that price. Sorry to be the bearer of bad news. Depending on the condition, I could give you a price but it would unfortunately be wuite lower than what I think you had in mind. Again, don't take this as an insult.



In other news, We have all but finished the center console double DIN sourround and switch plate. Just fine tuning some things that after put in the car looked wrong and gettign all the curves and edges perfect before we get into it hard. We'll keep everyone updated with the progress and maybe even throw up some pics along the way before we are finished.

Thanks

 

Wow that looks great but it also looks like a big job too.

 

about an hour to install and extend the wires minus of coarse navigation and ipod dock. lol now taking your center out completely to do it lol that is another story at least 1.5 hours

 

How are you Rcompart.....

$ 30 - $50 for both pieces...is a really good price.......please I need 5 sets of those console plates for some friends that has same cars and whant to start the Double Dim Project.....I'll pay you $100 for both...with switches so you can make money.......... where do I send you the Money......How long will it take to get them.....This is a real proposition

Thanks....

Jorge

 

So are you buying or selling them? I'm quite confused. One moment you were listing them for sale, now you want to buy more? Why don't you sell your friends the ones you have and have them get the other four? You can get these through your usual channels. Just takes a little time and work looking through what people have for inventory but they are out there. Thanks for the offer though.

 

Johnny I have been thinking about this, if you guys could make me one where I could keep the buttons and move them to the bottom like the alpine one I'd pretty much pay what ever you thought it was worth. Let me know.

 

$1000...LOL I know we have gone on and on about working out everything and we apologize for that. We just want to make sure it's perfect for everyone.

 

I am not going to say we bit off more then we can chew but literally I dont know how alpine did it. I have a feeling it was a 6 different molding process with wood that went to clay then went to fiberglass.. IF it is even fiberglass. Chances are they took a chance with the original judging from the inside they had an unlimited budget and some wonderfull talent. I know it has been awhile but hang in there we are not giving up. Though I pefer my set up with the buttons in the arm rest lol rudy just wont live with it like that say he feels like he is in a fighter jet.

"Negitive ghost ride the pattern is full"

 

Alright, read all the way through. Just getting on the update list. This idea looks awesome. BTW, I too prefer the buttons just below the stereo.