Troubleshooting & Technical Questions & Modifications Have technical or modification questions about the Crossfire? Find out the answer, or give advice in here!

Blank Dash. HELP HELP

Thread Tools
 
Old Feb 14, 2023 | 08:33 PM
  #1 (permalink)  
DRohr831's Avatar
Thread Starter
Joined: Feb 2023
Posts: 1
Likes: 0
From: Salinas, CA
Default Blank Dash. HELP HELP

When I put my key in the ignition to start if I take it only to acc all my lighted icons show up on panel then I turn to start it does not click or turn over. Screen goes blank black. Is this my ignition needs to be replaced
 
Reply
Old Feb 14, 2023 | 08:41 PM
  #2 (permalink)  
pizzaguy's Avatar
Administrator
Joined: Jun 2009
Posts: 13,932
Likes: 1,266
From: Fort Worth, Texas
Default Re: Blank Dash. HELP HELP

No one can tell you based on that post just what is going on, but has nothing to do with replacing "the ignition".

Try this and report back.

Get in car, turn on headlights. You need to monitor how bright the lights are, hopefully you have the car where you can see the lights shine on a wall ahead of you.
Turn key to START. Do lights dim way down? If so, the battery or battery connections are bad.
If the lights do not dim down but starter won't engage, release key to "ON".
Wait 45 seconds, does the engine cooling fan start spinning fast? If so, it's an RCM failure and we can deal with that easily.
 

Last edited by pizzaguy; Feb 14, 2023 at 08:44 PM.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
barrysmith
Troubleshooting & Technical Questions & Modifications
5
Jan 8, 2019 04:53 PM
MXQB7
Troubleshooting & Technical Questions & Modifications
7
Jul 11, 2013 10:56 PM
phoneguru
Crossfire Coupe
0
Mar 30, 2012 09:21 AM
BobbyCaz
Crossfire Coupe
25
Mar 17, 2012 04:13 PM
octitan
Troubleshooting & Technical Questions & Modifications
1
Jul 17, 2008 06:34 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -4. The time now is 07:55 AM.