What did you do to your Crossfire today?
Re: What did you do to your Crossfire today?
First you guys are Hilarious. Good thing.
Today, I did change the bent rim!
Wheel was balance and alignment was performed!
Hopefully before next Monday, I will change the broken fog light with new one and drive belt.
YEP!
Happy Thanksgiving to All!
Max
Today, I did change the bent rim!
Wheel was balance and alignment was performed!
Hopefully before next Monday, I will change the broken fog light with new one and drive belt.
YEP!
Happy Thanksgiving to All!
Max
Senior Member
Joined: Feb 2012
Posts: 1,287
Likes: 2
From: Texas City, Texas
Re: What did you do to your Crossfire today?
Tried a DIY headlight modification...no success with the caps, but the mesh worked out OK...we will have to see in the long run.
Senior Member
Joined: Dec 2010
Posts: 12,780
Likes: 184
From: Lineville, AL
Re: What did you do to your Crossfire today?
Nothing.
I did however replace the timing belt, idler, tensioner and water pump on my 2002 Chrysler Concorde Limited 3.5
( not a job for the faint of heart, but at least I know it was done right )
I did however replace the timing belt, idler, tensioner and water pump on my 2002 Chrysler Concorde Limited 3.5
( not a job for the faint of heart, but at least I know it was done right )
Re: What did you do to your Crossfire today?
Thanksgiving to All!
Changed this morning the fog light that was broken for quite a while.
Easy fix 20 minutes from door to door.
Have notice water in the trunk. I have seen somewhere a tread about that issue...
One more thing to take care of.
Next
Code P0402 something like that
Drive belt
Water in the headlight
and checking konis adjustment.
Cheers!
Changed this morning the fog light that was broken for quite a while.
Easy fix 20 minutes from door to door.
Have notice water in the trunk. I have seen somewhere a tread about that issue...
One more thing to take care of.
Next
Code P0402 something like that
Drive belt
Water in the headlight
and checking konis adjustment.
Cheers!
Senior Member
Joined: Apr 2006
Posts: 25,432
Likes: 648
From: Ontario
Re: What did you do to your Crossfire today?
I was going to do it Monday, then Tuesday and then Wednesday .... and finally today I put my Canadian DTRL Illumination Module in. It sure is tough to be lazy.
Senior Member
Joined: Apr 2013
Posts: 1,057
Likes: 5
From: myrtle beach, sc
Re: What did you do to your Crossfire today?
Senior Member
Joined: Sep 2011
Posts: 9,595
Likes: 26
From: Kellyville, Ok
Re: What did you do to your Crossfire today?
Here you go.. about the only thing you'll need is a way to seal off the OEM air filter boxes.. I had some foam rubber I cut down to fit along the sealing tract.. This is what's on the wife's roadster also..
Forum Regular
Joined: Sep 2013
Posts: 360
Likes: 0
From: Kennesaw Georgia
Re: What did you do to your Crossfire today?
As MR M said this comes with everything you need. I ran a bead of silicone in the stock filter box track then put them back together. Worked well. One note, the drivers side is a tight fit due to the oil cap and power steering reservoir. This makes the drivers side tube angle up and out a bit as you can see in my pics but it turned out great.
Senior Member
Joined: Apr 2013
Posts: 1,057
Likes: 5
From: myrtle beach, sc
Re: What did you do to your Crossfire today?
As MR M said this comes with everything you need. I ran a bead of silicone in the stock filter box track then put them back together. Worked well. One note, the drivers side is a tight fit due to the oil cap and power steering reservoir. This makes the drivers side tube angle up and out a bit as you can see in my pics but it turned out great.
Are you going to the spring meet??
Joined: Oct 2013
Posts: 87
Likes: 0
From: Mesa, AZ, USA
I did my first oil change on this car. I've never changed a cartridge filter. It was pretty easy.
I changed the headlight bulbs, not as easy. It took some work to get the headlights loose.
I finished off with cutting compound, polish, wax, and buff. Car is running much faster with fresh oil and a clean body. : )
I changed the headlight bulbs, not as easy. It took some work to get the headlights loose.
I finished off with cutting compound, polish, wax, and buff. Car is running much faster with fresh oil and a clean body. : )
Senior Member
Joined: Feb 2012
Posts: 1,287
Likes: 2
From: Texas City, Texas
Re: What did you do to your Crossfire today?
Had a loose spark plug wire the one closest to the firewall on the passenger side (of course)! Took me a little while to get it on right...hopefully, that will solve my other issue. May still be looking at a CPS...
Forum Regular
Joined: Apr 2012
Posts: 705
Likes: 4
From: Kansas, USA
Re: What did you do to your Crossfire today?
Took advantage of the Black Friday sales that EuroCharged was offering and finally ordered a tune for the SRT-6. She's still stock right now, but I see a CAI (possibly a DCAI) and a pulley in her future 
RL
RL
Senior Member
Joined: Aug 2006
Posts: 13,396
Likes: 25
From: Crystal Lake, IL
Re: What did you do to your Crossfire today?
Last edited by FP; Dec 3, 2013 at 12:32 PM.
Senior Member
Joined: Feb 2012
Posts: 1,287
Likes: 2
From: Texas City, Texas
Re: What did you do to your Crossfire today?
Finally got the back spark plug on the passenger side in properly, but it still seems to idle rough when in gear...still should look at the CPS?
Forum Regular
Joined: Apr 2012
Posts: 705
Likes: 4
From: Kansas, USA
[QUOTE=coolx;769836]Yep - they had a different item on sale every day during the week leading up to Black Friday and then on through the weekend. They offered a discount on all tunes that weren't already on sale. Since i missed out on the group buy earlier this year, I bought while they had the discount. They posted on the forum earlier this week about it.