Biggest stereo bang for the buck mod
Originally Posted by tighed1
I'll do Paypal too if it's easier for ya. $3 covers two (2) caps and postage.
Now do the mod!
Now do the mod!
This thread is great, but I'm still a little confused. I'm used to crossover lingo in terms of Hz and dB per octave. If I want a high-pass crossover in the 150-200 Hz range, what is my best choice of capacitor? I'm afraid a drop in anything above 200 Hz would make the fronts too weak.
Originally Posted by vipr1ab
This thread is great, but I'm still a little confused. I'm used to crossover lingo in terms of Hz and dB per octave. If I want a high-pass crossover in the 150-200 Hz range, what is my best choice of capacitor? I'm afraid a drop in anything above 200 Hz would make the fronts too weak.
Originally Posted by maxcichon
Did you read the early posts? Pelked1 did a great job on it. I just did a bit of empirical experimentation to find my choice of cap value.
Anyway, I think I want a couple of your caps. I'll PM you when I'm ready.
Pelked1
What's the install gouge if going with the Crutchfield pre wired caps (Bass Blockers) ? Install photos only address splicing the caps inline with speakers. Will I have to go directly to the amp with the pre wired caps ?
Thanks in advance. 2005 Rag Top
What's the install gouge if going with the Crutchfield pre wired caps (Bass Blockers) ? Install photos only address splicing the caps inline with speakers. Will I have to go directly to the amp with the pre wired caps ?
Thanks in advance. 2005 Rag Top
Originally Posted by maxcichon
Ok, guys, line forms to the left. I found my box of 270 uF, 100Volt caps.
$6 a pair mailed. You will have to come up with connectors. PM me and I'll send them forthwith. and post haste. I'll even throw in some spaghetti sized heatshrink tubing!
Anyone else reading this, I have ~33 pair to go to good homes. I'm not making any money on this, so no complaints! OK?
Paypal works for me.
$6 a pair mailed. You will have to come up with connectors. PM me and I'll send them forthwith. and post haste. I'll even throw in some spaghetti sized heatshrink tubing!
Anyone else reading this, I have ~33 pair to go to good homes. I'm not making any money on this, so no complaints! OK?
Paypal works for me.
Originally Posted by JimmySkullz
You have any left to sell?
This is another call for those who haven't received the caps they paid for.
I just today got an envelope back, postmarked 7/02 sent to Steve Burgess.
I recognize the name, but can't place the username. Did I send replacements?
Let me know.
I just today got an envelope back, postmarked 7/02 sent to Steve Burgess.
I recognize the name, but can't place the username. Did I send replacements?
Let me know.
Originally Posted by maxcichon
This is another call for those who haven't received the caps they paid for.
I just today got an envelope back, postmarked 7/02 sent to Steve Burgess.
I recognize the name, but can't place the username. Did I send replacements?
Let me know.
I just today got an envelope back, postmarked 7/02 sent to Steve Burgess.
I recognize the name, but can't place the username. Did I send replacements?
Let me know.
I went with two 470 uF's in series, making a non-polarized cap out of two polarized caps. This gives me a 235 uF cap.
I don't like it - took TOO MUCH bass out, IMO.
But I did something else, I only did ONE speaker, the driver's side. Gonna drive around and play with it (using the balance control to switch sides and compare) for a few days.
I THINK about a 330uF or so might be about right - I agree that there is too much bass as the factory set it up, but the 235uF I have in there is too little, and takes TOO much out.
I don't like it - took TOO MUCH bass out, IMO.
But I did something else, I only did ONE speaker, the driver's side. Gonna drive around and play with it (using the balance control to switch sides and compare) for a few days.
I THINK about a 330uF or so might be about right - I agree that there is too much bass as the factory set it up, but the 235uF I have in there is too little, and takes TOO much out.
Originally Posted by pizzaguy
I went with two 470 uF's in series, making a non-polarized cap out of two polarized caps. This gives me a 235 uF cap.
I don't like it - took TOO MUCH bass out, IMO.
I THINK about a 330uF or so might be about right - I agree that there is too much bass as the factory set it up, but the 235uF I have in there is too little, and takes TOO much out.
I don't like it - took TOO MUCH bass out, IMO.
I THINK about a 330uF or so might be about right - I agree that there is too much bass as the factory set it up, but the 235uF I have in there is too little, and takes TOO much out.
WOW! That was quick, my order is here! (Mouser.com)
I ordered 330's and 470's. Tried a 330 and like it. Have STILL only done the driver's side. Gonna do the passenger side tonight, after I finish the never-finished lawn.
I made mine with quick-connect male/female connectors, and put same connectors in the wiring - so I can take a cap out without tools and mate the wires together easily, should I ever want to (or if a cap goes bad).
Not sure I can provide pics, as my camera does not do close-ups well.
The 330's are part number 647-UVP1J331MHD from Mouser.com - anyone who wants to order them, can do so with that number. $1.26 each and $7 for shipping. (Expensive? Yes. But they ARE good parts, are non-polarized and mouser ships NOW - not weeks from now. This is something like my 10th order in the last four years - they are always quick.)
I ordered 330's and 470's. Tried a 330 and like it. Have STILL only done the driver's side. Gonna do the passenger side tonight, after I finish the never-finished lawn.
I made mine with quick-connect male/female connectors, and put same connectors in the wiring - so I can take a cap out without tools and mate the wires together easily, should I ever want to (or if a cap goes bad).
Not sure I can provide pics, as my camera does not do close-ups well.
The 330's are part number 647-UVP1J331MHD from Mouser.com - anyone who wants to order them, can do so with that number. $1.26 each and $7 for shipping. (Expensive? Yes. But they ARE good parts, are non-polarized and mouser ships NOW - not weeks from now. This is something like my 10th order in the last four years - they are always quick.)
Originally Posted by pizzaguy
Screwed around and screwed around - ended up with the 470's in there.
I sure am fussy.
I sure am fussy.

No, I ordered two 330's and two 470's from Mouser the other day. Put quick-connect plugs on all four caps and played around in the garage today for about an hour.
The Mouser part for the:
470's is 647-UVP1V471MHD
330's is 647-UVP1J331MHD
Mouser.com
The Mouser part for the:
470's is 647-UVP1V471MHD
330's is 647-UVP1J331MHD
Mouser.com
Last edited by pizzaguy; Aug 16, 2009 at 09:43 PM.
Originally Posted by pizzaguy
Screwed around and screwed around - ended up with the 470's in there.
I sure am fussy.
I sure am fussy.

I guess, depending on the music you listen to and just how screwed up your hearing is -either 330's or 470's really do the job. IMO, anyway.


