Don't start, don't lock unlock door, fun run without key
Thread Starter
Joined: Jul 2021
Posts: 10
Likes: 0
From: CL
Don't start, don't lock unlock door, fun run without key
good morning everyone. My Crossfire does not open the doors with the remote control, the car does not start and without the key inserted the fan starts running. I checked the fuses and changed the battery but the problem persists. can you help me?
Administrator
Joined: Jun 2009
Posts: 13,965
Likes: 1,293
From: Fort Worth, Texas
Re: Don't start, don't lock unlock door, fun run without key
That's not helpful. Does the starter engage or not? If you can't tell us that, we don't know what we are chasing.
This is very odd. Read that partial sentence, is that what you meant to type? If so, the Fan Control module is bad.
If you meant "WITH the key inserted and turned to "on", the fan runs very fast after about 30 seconds" then your RCM is failing to power up the ECU - easy fix.
without the key inserted the fan starts running. ?
If you meant "WITH the key inserted and turned to "on", the fan runs very fast after about 30 seconds" then your RCM is failing to power up the ECU - easy fix.
Thread Starter
Joined: Jul 2021
Posts: 10
Likes: 0
From: CL
Re: Don't start, don't lock unlock door, fun run without key
That's not helpful. Does the starter engage or not? If you can't tell us that, we don't know what we are chasing.
starter engage is ok. I have the feeling that there is no petrol reaching the engine
This is very odd. Read that partial sentence, is that what you meant to type? If so, the Fan Control module is bad.
If you meant "WITH the key inserted and turned to "on", the fan runs very fast after about 30 seconds" then your RCM is failing to power up the ECU - easy fix.
starter engage is ok. I have the feeling that there is no petrol reaching the engine
This is very odd. Read that partial sentence, is that what you meant to type? If so, the Fan Control module is bad.
If you meant "WITH the key inserted and turned to "on", the fan runs very fast after about 30 seconds" then your RCM is failing to power up the ECU - easy fix.
Senior Member
Joined: Apr 2006
Posts: 25,432
Likes: 648
From: Ontario
Re: Don't start, don't lock unlock door, fun run without key
There are three fans on the Crossfire, it is best to say which one you mean.
Thread Starter
Joined: Jul 2021
Posts: 10
Likes: 0
From: CL
Re: Don't start, don't lock unlock door, fun run without key
problem almost solved.
broken fuel pump relay.
fans is ok.
there remains only the problem of the doors that do not lock or unlock with the remote control
broken fuel pump relay.
fans is ok.
there remains only the problem of the doors that do not lock or unlock with the remote control
Administrator
Joined: Jun 2009
Posts: 13,965
Likes: 1,293
From: Fort Worth, Texas
Re: Don't start, don't lock unlock door, fun run without key
To re-sync the fob to the SKREEM, do this:
STANDARD PROCEDURE - TRANSMITTER PROGRAMMING
The Remote Keyless Entry Transmitter(s) can be programmed by the customer without special tools.
PROGRAMMING PROCEDURE
Transmitter programming by the customer is done by performing the following steps:
- Insert the key into the ignition switch.
- Press either the lock or unlock button momentarily twice.
Senior Member
Joined: Apr 2006
Posts: 25,432
Likes: 648
From: Ontario
Re: Don't start, don't lock unlock door, fun run without key
To my understanding the immobilizer is the SKREEM.
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
