How to program your own key. SAVE $$$
Senior Member
Joined: Apr 2013
Posts: 1,057
Likes: 4
From: myrtle beach, sc
Re: How to program your own key. SAVE $$$
This is straight from the Crossfire manuals supplied to the dealership, or if you are a Chrysler tech, I got it from Tech Connect.
STANDARD PROCEDURE - TRANSMITTER PROGRAMMING
The Remote Keyless Entry Transmitter(s) can be programmed by the customer without special tools.
PROGRAMMING PROCEDURE
Transmitter programming by the customer is done by performing the following steps:
Hope this is useful and saves you $100.
Shawn
STANDARD PROCEDURE - TRANSMITTER PROGRAMMING
The Remote Keyless Entry Transmitter(s) can be programmed by the customer without special tools.
PROGRAMMING PROCEDURE
Transmitter programming by the customer is done by performing the following steps:
- Insert the key into the ignition switch.
- Press either the lock or unlock button momentarily twice.
Hope this is useful and saves you $100.
Shawn
Joined: May 2018
Posts: 2
Likes: 0
From: s.i.,n.y.
Re: How to program your own key. SAVE $$$
This is straight from the Crossfire manuals supplied to the dealership, or if you are a Chrysler tech, I got it from Tech Connect.
STANDARD PROCEDURE - TRANSMITTER PROGRAMMING
The Remote Keyless Entry Transmitter(s) can be programmed by the customer without special tools.
PROGRAMMING PROCEDURE
Transmitter programming by the customer is done by performing the following steps:
Hope this is useful and saves you $100.
Shawn
STANDARD PROCEDURE - TRANSMITTER PROGRAMMING
The Remote Keyless Entry Transmitter(s) can be programmed by the customer without special tools.
PROGRAMMING PROCEDURE
Transmitter programming by the customer is done by performing the following steps:
- Insert the key into the ignition switch.
- Press either the lock or unlock button momentarily twice.
Hope this is useful and saves you $100.
Shawn
Senior Member
Joined: Apr 2006
Posts: 25,432
Likes: 647
From: Ontario
Re: How to program your own key. SAVE $$$
No man up required from anybody just the ability to read your manual. There is a lot to be learned in these manuals, so get one from this site as a PDF and get reading.
Senior Member
Joined: Oct 2013
Posts: 2,152
Likes: 37
From: Orlando
Re: How to program your own key. SAVE $$$
OK so to be complete you need four things in a complete fob:
1) Case. $6 on ebay with uncut key
2) Key: included in case, most locksmiths can cut.
3) Circuit Board. Does remoter lock/unlock/panic requires battery. Can program on car.Range up to about 30 ft.
4) RFID chip. Used by SKREEM to permit car to start. Special program required. Range: an inch or two.
So the only real issue is the RFID chip that is present in the fob and the valet key. To replace the SKREEM, you must program the SKREEM to both the VIN and the RFID keys. if the SKREEM is working, can you just clone the RFID chip ? YWTK.
I have some RFID chips coming in. What tool (preferably PC based) is required to read from one RFID chip and copy to another ?
1) Case. $6 on ebay with uncut key
2) Key: included in case, most locksmiths can cut.
3) Circuit Board. Does remoter lock/unlock/panic requires battery. Can program on car.Range up to about 30 ft.
4) RFID chip. Used by SKREEM to permit car to start. Special program required. Range: an inch or two.
So the only real issue is the RFID chip that is present in the fob and the valet key. To replace the SKREEM, you must program the SKREEM to both the VIN and the RFID keys. if the SKREEM is working, can you just clone the RFID chip ? YWTK.
I have some RFID chips coming in. What tool (preferably PC based) is required to read from one RFID chip and copy to another ?
Senior Member
Joined: Sep 2011
Posts: 9,595
Likes: 26
From: Kellyville, Ok
Re: How to program your own key. SAVE $$$
"An inch or two".. mine slipped back in the new case about 1/4 inch on my first transplant.. 2 no starts and I was back in the house looking to see what was up. And good luck on the "reader - programmer".. I spent an evening with Google and Mercedes based groups looking for a path.
Senior Member
Joined: Apr 2006
Posts: 25,432
Likes: 647
From: Ontario
Re: How to program your own key. SAVE $$$
OK so to be complete you need four things in a complete fob:
1) Case. $6 on ebay with uncut key
2) Key: included in case, most locksmiths can cut.
3) Circuit Board. Does remoter lock/unlock/panic requires battery. Can program on car.Range up to about 30 ft.
4) RFID chip. Used by SKREEM to permit car to start. Special program required. Range: an inch or two.
So the only real issue is the RFID chip that is present in the fob and the valet key. To replace the SKREEM, you must program the SKREEM to both the VIN and the RFID keys. if the SKREEM is working, can you just clone the RFID chip ? YWTK.
I have some RFID chips coming in. What tool (preferably PC based) is required to read from one RFID chip and copy to another ?
1) Case. $6 on ebay with uncut key
2) Key: included in case, most locksmiths can cut.
3) Circuit Board. Does remoter lock/unlock/panic requires battery. Can program on car.Range up to about 30 ft.
4) RFID chip. Used by SKREEM to permit car to start. Special program required. Range: an inch or two.
So the only real issue is the RFID chip that is present in the fob and the valet key. To replace the SKREEM, you must program the SKREEM to both the VIN and the RFID keys. if the SKREEM is working, can you just clone the RFID chip ? YWTK.
I have some RFID chips coming in. What tool (preferably PC based) is required to read from one RFID chip and copy to another ?
Senior Member
Joined: Apr 2006
Posts: 25,432
Likes: 647
From: Ontario
Re: How to program your own key. SAVE $$$
Joined: Dec 2018
Posts: 32
Likes: 0
From: Las Vegas
Re: How to program your own key. SAVE $$$
It was a new key fob, with a blank key that I had cut. I followed the steps and it did not work. Just to clear thins up for me when you press the unlock button do you do it with the key in the ignition ? Then turn the key to the run position ?
Senior Member
Joined: Apr 2006
Posts: 25,432
Likes: 647
From: Ontario
Re: How to program your own key. SAVE $$$
Senior Member
Joined: Nov 2006
Posts: 6,568
Likes: 755
From: Orange County CA.
Re: How to program your own key. SAVE $$$
One may be a little cheaper from Needswings? You can not just buy a key on E-bay. They are programmed for your car only.
Last edited by ZERACER; Feb 9, 2019 at 04:23 PM.
Senior Member
Joined: Apr 2006
Posts: 25,432
Likes: 647
From: Ontario
Re: How to program your own key. SAVE $$$
What is not true, please explain to what you are referring to.
If you do not quote the post you are referring to only you know what could be in errror.
Many people do this and others cannot understand the reply.
If you do not quote the post you are referring to only you know what could be in errror.
Many people do this and others cannot understand the reply.
Senior Member
Joined: Apr 2006
Posts: 25,432
Likes: 647
From: Ontario
Re: How to program your own key. SAVE $$$
Joined: Jan 2019
Posts: 211
Likes: 1
From: Illinois
Re: How to program your own key. SAVE $$$
If you buy a used keu/fob get the vin the key/fob came from call chrysler dealer give them both vins theu will beable to tell you if it is compatible for your car and can be reprogrammed to your car. If so buy a new blank key and they can lazer cut the new key for your car.
Administrator
Joined: Jun 2009
Posts: 13,932
Likes: 1,266
From: Fort Worth, Texas
Re: How to program your own key. SAVE $$$
If you buy a used keu/fob get the vin the key/fob came from call chrysler dealer give them both vins theu will beable to tell you if it is compatible for your car and can be reprogrammed to your car. If so buy a new blank key and they can lazer cut the new key for your car.
But you cannot program the RFID chip to your SKREEM, therefore, the car will not start and run.